Furniture is closely related to people's lives, affecting people's quality of life and physical health. Therefore, consumers are reminded to make a good knowledge reserve before purchasing furniture, and learn some tips for identifying and identifying various furniture. Here, the top ten plate brand artisans specially collected 11 tips for buying, I hope to help you.
1. Whether the furniture materials are reasonable; different furniture and surface materials are different. For example, the legs of tables, chairs and cabinets require wood, which is relatively strong and can bear the weight, while the internal materials can be replaced by other materials; the thickness of the large wardrobe legs is 62.5px , which is too thick and easy to bend and deform. Kitchen cabinets and bathroom cabinets cannot be made of fiberboard, but plywood should be used because the fiberboard will expand and damage when exposed to water; the dining table should be washable. It was found that the wood had insect eyes and foaming, indicating that the drying was not complete. After checking the surface, open the door and drawer door to see if the inner material is rotten. You can use your fingernail to lick it. If you break it in, it means that the inner material is decaying. After opening the door, smell it with your nose. If it is nose, glare, or tears, it means that the formaldehyde content in the glue is too high and it will be harmful to the human body.
2 , the wood moisture content does not exceed 17 ; the moisture content of the furniture should not exceed 17% , the water content is high, the wood is easy to warp and deform. When the average consumer buys, there is no test instrument. You can take the method of hand touch and touch the bottom of the furniture or the place where there is no paint inside. If you feel the moisture, the moisture content is at least 50% , which cannot be used at all. Another way is to sprinkle a little water on the unpainted wood. If the sputum is slow or not, the moisture content is high.
3 , the furniture structure is firm; small pieces of furniture, such as chairs, stools, hangers, etc. can be dragged on the concrete floor when picking, gently fell and fell, the sound is crisp, indicating good quality; if the sound is dumb, there are flaws The murmur of the slaps, indicating that the blinking is not tightly combined and the structure is not strong. The desk and table can be shaken by hand to see if it is stable. The sofa can sit and sit. If you sit on a move, you will twist and sway. If you shake it, it will be a nail, and it will take a long time. Square tables, tables, chairs and other legs should have four triangular clips, which can be used for fixing. When you choose, you can look over the table and chair. The cloth chair can be touched by hand.
4. Whether the four feet of the furniture are flat; this point is flat on the ground and it is known that some furniture has only three legs to land. Look at the desktop is straight, can not bow back or collapsed. The table top is raised, the glass plate is placed on it, and the table top is recessed, and the glass plate is crushed by a pressure. Pay attention to the inspection of the cabinet door. The slit of the drawer should not be too large. It should be straight and straight, and the door should not sag.
5 , veneer furniture seams are not strict; whether it is veneer veneer, PVC or pre-painted paper, we must pay attention to whether the skin is flat, with or without bulging, foaming, and stitching. Look at the light when you check it, and don't see it when you don't. The ash veneer veneer furniture is relatively damaged, generally only used for two years. In the case of wood veneers, the veneered veneers are better than the chopped ones. The way to identify the two is to look at the pattern of the wood. The wood texture of the cut veneer is straight and dense, and the veneered veneer pattern is curved and sparse. Particleboard veneer furniture, the ground part must be edged, and the edge banding will absorb moisture, swell and damage. Generally, the corners of the veneer furniture are easy to be tilted up. When picking, you can buckle the corners by hand. If you buckle it up, it means there is a problem with the glue.
6. Whether the edge of the furniture is flat; the edge is not flat, indicating that the inner material is wet, and the seal will fall off in a few days. The edge banding should also be rounded and not straight at right angles. The edges sealed with wood strips tend to get wet or crack. The furniture inlaid with the plywood is nailed with nails. It is necessary to pay attention to whether the nails are flat and whether the color of the nails is consistent with other places. Usually the nail hole is sealed with putty. Pay attention to whether the putty is bulging. If it is bulged, it will not work. Slowly, the putty will fall out from the inside.
7. Mirror furniture should be taken as a photo; choose furniture with mirrors, such as dressing table, mirror, and dressing mirror. Pay attention to see if the mirror is deformed or not. Check if there is lining at the mercury in the back of the mirror. Paper and backboard, no backboard is unqualified, no paper is not good, otherwise the mercury will be worn away.
8. The paint should be smooth; the paint part of the furniture should be smooth and flat, not sprinkled, wrinkle-free, and flawless. The corners are not straight at right angles, and the straight edges are prone to slag and paint. There should also be a paint inside the door of the furniture, without the paint board being easy to bend and not beautiful.
9. Whether the accessories are installed properly; for example, check that the door lock switch is not working; the big cabinet should be equipped with three dark hinges, and some can only be installed with two; the upper three silks, some cut corners, only one Screws will be used when they are used.
10 , sofa, soft bed to sit; when picking a sofa, soft bed, should pay attention to the surface should be flat, but not high and low; soft and hard to be even, but not hard, that piece of soft; soft hardness should be moderate, It can't be too hard or too soft. The method of selection is to sit down and squat with your hand, the flatness is not flat, and the spring does not ring. If the spring laying is unreasonable, causing the spring to bite the spring, it will make a sound. Secondly, it should also pay attention to whether the quilting has broken wires or jumpers, and whether the density of the corner teeth is reasonable.
11 , the color should be coordinated with the interior decoration; although the white furniture is beautiful, but the time is long, it is easy to turn yellow, and the black is easy to gray, not the picture is beautiful at the time, and at the end it is not white, black is not black. In general, wood-colored furniture is not easily discolored.
In addition to providing you with quality products, the artisan plate will also teach you a lot of little knowledge to bring convenience to you and your family! National toll-free hotline: 400-0218580
Why is Standing Desk becoming more and more popular? Sit stand desk is not only a desk. Using sit and stand desk station interchange for office can make sense of life, reduce fat, enhance energy, reduce pain, improve work efficiency and improve team cooperation ability.
1.5-2.5mm thick cold rolled steel plate with high mechanical strength, smooth surface and uniform thickness,Double motor balanced drive, lifting the whole table without shaking. The rising and falling sound is less than 45 dB, which is lower than that of keyboard typing.
The color of ergonomic standing desk frame: black, white, gray, and can be customized; it can be matched with different color panels, reflecting the modern design of the product.
Sit Stand Desk,Sit And Stand Desk,Electric Sit Stand Desk,Stand Up Sit Down Desk,Best Sit Stand Desk
Suzhou Uplift Intelligent Technology Co., Ltd , https://www.uplifting-desk.com