Maintenance with a good pen is also very important. To enable the new pen, you must open the pen first. The pen that I bought will be soaked in "warm water", and the time of soaking water should not be too long. It can be "opened" by the pen, and the gelatin of the pen can not be opened. Otherwise, it will become a "hair brush". Fall off. Purple is harder and should be immersed in water for some time.
The pen is a necessary job before writing. You can't write with a pen. The method is to first soak the pen with water, then lift it up, and not dip it for a long time, so as to avoid the gelatinization of the pen root. After that, the pen is hung upside down until the pen is restored toughness, which is about ten minutes. The pen must be dry when it is preserved. If it is not a pen, it will become brittle and fragile, and its elasticity will be poor.
After that, I can start writing. This "ink" is also very university-required. In order to achieve uniformity and make the ink penetrate into the pen, the water must be drained first, and the pen can be dragged on the absorbent paper until it is dry. The so-called "dry" is not completely dry, just go to the water to contain the ink. "The pen is three points, not deep into the weak and weak," but the ink is too dry, can't run freely, and the ink is weak and weak.
Wash your pen immediately after writing. The ink has a gelatinous color. If it is not washed, the pen will adhere to the ink and the glue firmly after it is dry. It is not easy to open when it is used again, and it is easy to break the pen.
After washing, first drain the remaining water and smooth it out (before entering the ink). Hang the pen on the pen holder and let the remaining water continue to drip until it is dry. It should be placed in a cool place to dry, in order to preserve the original shape and characteristics of the pen, not exposed to the sun. Keep the essentials of the pen to dry.
Multifunction design, it can be used as angle scraper, glass glue blade, adhesive residue scraper, and seam repair tool.
The spatula is finished with corners with different angles, allowing you to choose the appropriate tip for the job.
It does not scratch the surface on which the silicon is being Now you can prevent any loose edges of silicone that trap moisture.
Caulking Tool Kit,Professional Caulking Tools,Caulk Finishing Tool Set,Silicone Calking Tool
jiangsu concentric internatinal ltd , https://www.jsconcentriccorps.com