[ Zhonghua Warrior Net ] MDF is made of wood fiber as a raw material through a series of processing. Because of its excellent performance and safety, the use rate is getting higher and higher. Is it a wardrobe for MDF? Is it a good idea to make a wardrobe through MDF? Let's take a closer look at MDF. Please see the introduction of MDF in the wardrobe.
Is the MDF a wardrobe?
MDF board is a good wardrobe? Introduction to MDF board
MDF is a type of MDF, including long-fiber boards and short-fiber boards. An artificial board made of wood fiber or other vegetable fiber, which is crushed, separated by fiber, dried, and then urea-formaldehyde resin or other suitable adhesive is applied, and then hot pressed. The density is generally in the range of 0.5-0.8 g/cm 3 (the density of the mass pass is not less than 0.72 g/cm 3 ), and the thickness is generally 3-30 mm.
MDF board is a good wardrobe? MDF board wardrobe features
1. The internal structure is uniform, the density is moderate, the dimensional stability is good, the deformation is small, and the physical and mechanical properties are moderate.
2. The surface is smooth and smooth, and the machining performance is good. The thin wood, pattern and novel and beautiful decorative paper can be pasted on it, so it is deeply loved by people in home decoration, and is often used to make furniture and partitions.
3. It can be applied to the middle border and middle clips of painting in modern decorative frameless paintings. The national registered trademark visual life frameless painting is the application to make life more environmentally friendly.
MDF board wardrobe? MDF board wardrobe considerations
1. Check whether the thickness and density are uniform, whether the corners are damaged, whether there are delamination, bulging, carbonization, etc., and whether there is a soft part.
2. When conditions permit, a small piece of medium density fiberboard can be sawed in water with a water temperature of 20 ° C for 24 hours to observe the thickness change, and observe whether there is a small drum kit on the board surface. The thickness varies greatly, and there are small drums on the board surface, indicating that the board surface is poor in water resistance.
3. Select medium-density fiberboard with low release. When using olfactory smell, choose medium-density fiberboard with low odor. Because the smell is bigger, the higher the formaldehyde emission, the greater the pollution.
The above is the introduction of MDF as a wardrobe. The internal structure of MDF is uniform and stable. It can guarantee the safety of our use, and its appearance is clean and smooth. The visual enjoyment, the relatively clear pattern can make us have a good visual enjoyment, then everyone thinks that MDF is a wardrobe?
Aluminum Hookah/Shisha Foil Roll
Smoking hookah is very popular in Arab countries. After putting various flavors of tobacco into the pipe, it is sealed with aluminum foil, which is called for Shisha/Hookah aluminium foil
Shape: round, square, roll, and can be punched on the surface
Color: usually made of silver, some customers will request that the aluminum foil be painted with the corresponding color according to the taste of the hookah
Features: good thermal conductivity, safety, sanitation, environmental protection, easy to use
Shisha/Hookah Aluminum foil roll can be packed into a color box(cardboard box or corrugated box) with metal cutter.
Product Specification
For shape of roll:
1- Width: 10cm, 12cm, 15cm, 18cm(general size) and according to customer's requirements
For shape of Round:
2- Diameter ID: 12cm, 14cm ,15cm ,18cm(general size) and according to customer's requirements
For shape of Square
3- Diameter size:12*12cm, 14*14cm, 15*15cm(general size) and according to customer's requirements
5- Thickness: 10micron,16micron,18micron,22micron,25micron,40micron,45micron or according customer`s requirement.
6- Shape: Roll or round , square(with holes and without holes)
7- Material: Aluminium foil
Aluminum Hookah/Shisha Foil Roll,Best Aluminum Hookah,Best Shisha Foil Roll,Hookah Foil Puncher
Zhengzhou Eming Aluminium Industry Co., Ltd. , https://www.emingalufoil.com