[ Chinese wardrobe net ] to the top wardrobe is a special wardrobe classification product, it is so named, mainly because the top of the wardrobe and the ceiling are connected to each other, which helps to improve the efficiency of space utilization to a certain extent, but from another From one perspective, there are many other problems that may arise. For example, whether the quality of the wardrobe will be damaged due to thermal expansion and contraction, or whether it will be difficult to disassemble later, and it is difficult to install in the early stage, then those who have doubts may wish to refer to it. See below.
First, how to install plaster line to the top wardrobe
1. Use a gypsum board or light brick to make a space and recess the wardrobe so that the top gypsum ceiling can be solved.
2, first ceiling 10cm above the closet (this thickness is consistent with the thickness of your top corner line), and then add the top corner line on the side of the ceiling, the wardrobe is equal to 10 cm shorter, but does not destroy the effect of the top corner line.
Second, the wardrobe to the top of the design common problems and solutions
Question 1: The moisture contained in the wardrobe sheet will cause thermal expansion and contraction due to the influence of temperature. Will it affect the top decoration?
A: The general custom closet will reserve a small distance for easy installation and also help the expansion joint. The expansion joint is to prevent the house from cracking due to climate change. The custom wardrobe will not affect the decoration of the top wall.
Question 2: Will the top wardrobe have a visual sense of oppression?
A: Many people will have such concerns. Whether the design of the top wardrobe will bring a sense of oppression depends on the size of the space and the overall matching, color and lighting. If the bedroom area is lighter, the small series is not recommended. The wardrobe is made in the form of a top. Bedroom decoration design is also very important, it is recommended to find a professional designer to design.
Question 3: The height of the custom closet is too high. It is easy to cause pressure on the side panels to cause deformation and reduce the life of the wardrobe. Is this true?
A: As long as you choose a regular brand custom closet, plus high-quality plates, there will be almost no such problems. The average dwelling from the ground to the roof is about 2.8 meters, slightly higher than 3 meters, but it is a minority. Superior residence. Moreover, the general wardrobe does not really top to the ceiling, but will leave a part of the distance for easy installation. After the installation is completed, the installation master will fill the gap with glass glue or other filler.
Third, the custom wardrobe installation steps
(1) Preparation stage
1. Material is present
More formal furniture manufacturers, cardboard packaging is generally shipped to the site. After unpacking, check the plates and hardware.
2. Fixing screws
The nails are generally left on the plates according to the design drawings, and the workers at the site use special tools to fix the screws.
3. Measuring side panels
Since the closet is placed against the wall, the side panel is sawn off at the position of the baseboard. After you have it, look it up and see if it fits.
(2), installation stage
1. Place the bottom plate
The floor placed on the bottom of the wardrobe should be cleaned beforehand, because it will be troublesome to clean up after installation.
2. Fixed frame
Install the side and back panels of the closet according to the grooves on the board and adjust the position between the boards.
3. Install the top plate
Prepare a bench for climbing, the top plate should be lifted up and then fixed with rivets.
4. Mounting shelf
Place the shelf where you have previously screwed it and then secure it. Pay attention to the fixed position of the shelf and the back and side panels.
5. Fixed door rail
The door rails are installed on the top and bottom sides of the wardrobe. The material of the door rails is better, lighter and firmer.
6. Install the clothes rail
Fix the rivets in the reserved position and install the clothes rail. Note that the two sides should be balanced.
(3), wardrobe installation precautions
1. Check whether the wardrobe panels and hardware are required by yourself. The brand's plates and hardware can be verified by checking the anti-counterfeiting marks to prevent some businesses from stealing materials and hardware.
2, check the board for scratches, the general installation of workers are more experienced, they are also careful during handling and installation, but the owner should still carefully check, more precautions to prevent workers from handling the process and scratching the wardrobe during the installation process.
3, check whether the wardrobe design is consistent with the previous design plan, check whether the hanging wardrobe, the dressing area, the drawer area, etc. are in the previously planned area, whether a design link is missing; after the installation is completed, check whether the installation is missing, is there any Small items such as handles are not installed.
4. Check whether the wardrobe door and hardware are used smoothly. After the installation is completed, switch the cabinet door several times. Pull the drawer several times to see if it is smooth to use. If it is pulled harder or the wardrobe door is closed, there is a gap. Let the workers debug in time.
The above mentioned mainly relates to the method of installing the top wardrobe and the common problems, solutions and measures in the course of such operations. They are mainly designed for consumers to worry about the various aspects of the top wardrobe, and use the professional perspective to explain and explain the problem as much as possible, so friends who are interested in purchasing, or interested in deep understanding can refer to Develop your own actual demand budget, or a comprehensive physical store inspection to develop a reasonable plan.
Simple design :Kid Furniture Sets Homebase comes with 1 chair, made from faux wood, and the modern two-color design of the table in modern shades of gray and white ensures it looks just as cool in a playroom or living room.
Kid Furniture Kit: Movable table with storage features an extended two-sided game table with a reversible game board compatible with most major blocks. On the other side is a smooth surface perfect for model trains, art projects, tea parties, snacks, dollhouses and other toys. You can use Kid Furniture Sets Lowes as kids' activity tables, normal tables, play tables.
Large storage space: Under the art surface, an easily accessible storage compartment for building bricks, paintbrushes, toys, and other items. This children's table and chair set is compatible with Lego bricks and will add a nice touch to any room. Tables with building panels: The building panels above Quality Kid Furniture are compatible with most major building bricks. This wooden children's dining table is the perfect gift for children aged 6-12; This activity play table with storage size is suitable for toddlers, children, older children over 3 years old.
Kid Furniture Sets Homebase,Kid Furniture Kit,Kid Furniture Sets Lowes,Quality Kid Furniture
Igrow Technology Co.,LTD , https://www.igrowdesks.com