[China wardrobe Network With the improvement of living standards, people have a deeper understanding of the custom closet, custom closet requirements, in addition to design, environmental protection has become a wardrobe consumers to buy a hot topic. If the family's economic situation is general, and it is necessary to ensure health and environmental protection, consumers can customize the wardrobe according to the size of the apartment. Now the mainstream plates in the wardrobe store are MDF and solid wood particle board. The particle board is more bearing. If there are more storage items, it is recommended to choose the particle board. And the MDF is easy to shape, can make a lot of shapes, more beautiful. But how to choose two kinds of plates, mainly depends on the needs of consumers, the following small series with you to understand the characteristics of the two plates.
Solid wood particle board solid wood particle board is a scrap made of wood or other lignocellulosic materials. After drying, sizing and special equipment, the core layer flakes are oriented in a crisscross orientation, and then hot pressed (pressure reaches 3000). Papa) A wood-based panel after molding. After drying, the solid wood particle board has a small expansion coefficient and has strong moisture resistance. Solid wood particle board is actually a kind of board produced by the process of particle board, which is a kind of particle board. Solid wood particle board use: As a new type of high-grade environmentally friendly substrate, solid wood particle board has been widely used by furniture manufacturers in Europe and the United States. The domestic high-end panel furniture market has also begun to adopt this type of board in large areas. Good particle board wood has a uniform particle size and a uniform gap in the middle. It can be repeated for the original hole to eat the nail many times, which is considered to be a kind of particle board, but the particle board can not be used as a molding door, and can only be used as a laminate or a flat door. Environmental protection of solid wood particle board: The density of solid wood particle board is higher, the wood fiber particle size in the board is larger, and the essence of natural wood is retained more. The content of solid wood particle board in adhesive use is generally less than 5%. The toxic formaldehyde gas will begin to be released from the board during use. The national family has the requirement that the amount of formaldehyde released per 100 grams of the E1 board is less than 9 milligrams, which can be directly used for interior decoration. Further reading: The trend of furniture materials - solid wood particle board MDF MDF is a kind of MDF, which is a man-made board processed by a series of processes of small diameter logs, harvesting, processing residues and other plant fibers. An artificial board made by crushing, separating the fibers, drying the urea-formaldehyde resin or other suitable adhesive, and then hot pressing. The density is generally in the range of 0.5 to 0.8 g/cm 3 and the thickness is generally 3 to 30 mm. Medium density fiberboard has excellent grip mechanical properties, decorative properties and processing properties. MDF use: Due to its excellent performance and effective way of comprehensive utilization and rational utilization of wood, medium density fiberboard is often used in furniture or as a wardrobe partition, and can also be used in modern decorative frameless paintings. The middle border of the painting and the middle clip, the frameless painting is applied in such a way that life is more environmentally friendly. MDF has therefore become one of the most promising products. MDF environmental protection: Since the use of certain adhesives in the production of MDF will contain a certain amount of formaldehyde, when consumers purchase green and environmentally friendly products, the key is to see whether to use adhesives without adding formaldehyde, and it is recommended to customize the wardrobe. Ventilation is used after two weeks. Tips for furniture fans: MDF is made of logs and plant fibers. It will contain a small amount of adhesive and release formaldehyde. It can be used after a period of ventilation. The solid wood particle board is a material processed by scraps. The size varies, so the amount of formaldehyde released by the adhesive varies from sheet to plate. Industry professionals are reminding consumers to look for environmentally-friendly plates on the wardrobe materials. For low prices, pungent odors, and no formal production approval, consumers must resolutely put an end to such products. If you use both in a closet, the backboard uses MDF, and the laminate uses solid wood particle board, which can take advantage of the flatness of the MDF, the product shape can be more beautiful, and also use solid wood. The particle board is environmentally friendly and can create an environmentally friendly living environment to the utmost extent.
Memory Foam Mattress,10 Inch Memory Foam Mattress,Compressed Memory Foam Mattress,Travel Memory Foam Mattress
HESHAN HAIMA FURNITURE CO., LTD , https://www.springmattress.com