If a large-scale mechanical equipment such as the photo-setting machine is not well-maintained during use, it will inevitably lead to some failures. Today, I will share some common faults and solutions for the images-setting machine. This article will introduce you to the Nanjing imagesetter ranking.
There are several cutouts in the imagesetter. If a sudden error occurs, the safety switch must first be checked. There have been cases where the release box cutout has become loose, and the circuit that has not been connected to the circuit has started to report an error, and it can be solved after 3 days before and after checking. There are many transformers and magnetic switches in the imagesetter. Sometimes, if you accidentally touch it, it will be damaged. If you damage it, you don't need to buy the original accessories. The domestic transformers and magnetic switches can be used instead.
The installation photo-setting machine needs to be designed according to the manufacturer's environmental requirements. The hardware must be assembled according to the standard to meet the indoor dry humidity requirement. In the rainy and humid season from April to August every year, in order to save, the photo-receiving machine does not pay attention when not in use. The indoor dry humidity standard is dehumidified and moisture-proof when the row is discharged. If moisture enters the imagesetter, the most likely problem is the laser motor of the photo-aligning machine. After the damp, an oxide layer will be formed between the rotor and the stator. Although the camera motor can still work when it is started up, after turning the laser motor by hand, it can easily feel the difficulty of rotation and accompanied by obvious friction sound. Such a laser motor may sometimes work and sometimes not work.
At the same time, in addition to the routine maintenance, the plate-making machine also needs to regularly check the wear of the gears, bushings, rubber rollers, chain tension, water-cooled liquid level and so on. In addition, since the rubber roller of the developing tank is in a soaking state for a long time, it is necessary to perform a counter-aligning operation periodically to ensure elasticity.
Article source address: http://
Office Furniture,Office Desk,L Shape Office Desk,Computer L Shape Office Desk
AU-PINY FURNITURE CO., LTD , https://www.jiangmenaupiny.com