What are the water purifier installation guides for the top ten brand water purifiers?

In China, the problem of drinking water has always been valued by people, and water purifiers have become hot products. But the water in the water inlet industry is very deep, and some unscrupulous traders will use inferior filters to increase profits. Therefore, Xiao Bian suggested that it is best to choose the top ten brands of water purifiers, then what are the top ten brand water purifiers, and how about the water purifier installation guide? Let's take a look at it!

What are the top ten brands of water purifiers?

There are still many brands of water purifiers on the market. Every brand is actually very good. It is necessary to fully understand the advantages of each brand water purifier before choosing. The top ten brands of water purifiers include Quanlu Water Purifier, Paragon Water Purifier, Jingzhiquan Water Purifier, Dalton Water Purifier, Qinyuan Water Purifier, Panasonic Water Purifier, and Shui Li. Water purifier, Mitsubishi water purifier.

Water Purifier Installation Guide

Step 1: Install the water purifier accessories

Before installation, check whether the accessories are complete, check whether all the water-related fittings such as pipelines, joints and faucets of the water purifier are complete, and assemble the products that need to be assembled on site to be assembled.

Step 2: Install the water purifier host

When installing the water purifier, insert the end of the unopened RO membrane with two black “O” rings into the RO membrane tube until the end of the feel is inserted, and then tighten the end cap of the RO membrane tube. Then, the RO membrane tube in-water PE tube is removed and placed in a container, and the water source is turned on to turn on the power, so that the first three pre-treated filter shells are filled with water, and the black primary filtered water flows out. After the black water is drained, turn off the power, and then replace the removed RO membrane tube into the water PE tube.

Step 3: Connect the water inlet tee

After the water purifier main unit is installed, connect the water inlet tee. Close the tap water main switch, wrap the threaded inlet of the ball valve a few turns with the raw material tape, and then directly at the side hole of the water inlet tee, and connect the PE pipe at the outlet of the ball valve.

Step 4: Connect the water inlet, water outlet, and sewage outlet

The PE pipe is cut at a good distance, and the water inlet tee is connected to the PE pipe and connected to the water inlet of the water purifier. Connect the PE pipe to the water inlet of the main machine, and the water inlet of the integrated machine and the box water purifier is located outside the machine. Connect the PE pipe to this rear activated carbon here, here is the water outlet. When connecting the drain outlet, the joint pipe is here, once a month, once for 10 minutes.

Step 5: Flushing and debugging

Then turn on the switch, put water for 20 minutes to rinse, there will be some black water to flush out, this is normal, this is a small amount of charcoal powder, do not drink the water for the first two or two days, put a few times of water, the water quality will be more stable You can drink straight.

Through the above-mentioned small series about the contents of the top ten brand water purifiers and the installation instructions of the water purifier, consumers have learned about the top ten brands of water purifiers. When using a water purifier, consumers also need to pay attention to cleaning and replacing the filter cartridge regularly.