Cloth wardrobe assembly graphic combination

[Chinese wardrobe net] Cloth wardrobe is widely used in the closet because of its cheapness, but the cloth wardrobe is also more troublesome. It is to assemble itself. Many people think that assembly is more difficult. In fact, the method is relatively simple. Let's take a look at the cloth wardrobe assembly drawing.

1. Find the parts of the chassis and put them together. Note that it is only the bottom part. Some of them have a shoe rack, and the shoe rack part must be installed first. As shown below:

2, note that the second step is not to put the rest of the shelves, and first on the cloth. Open the zipper of the cloth, and the place where the middle is stuck is also pulled open, bottom down. There are some small holes dug in the bottom of the cloth. Pull the cloth from top to bottom according to each hole and pull down the vertical tubes. You can not pull to the bottom first. As shown below:

3. Put the rest of the pipe in the cloth, then pull the cloth up, cover the top of the pipe, and adjust it until the cloth looks flat and there are no wrinkles. As shown below:

4. Our installation is complete. Note: Some are plastic interfaces, sometimes they are a bit tight. Don't use strong force to insert, accidentally crack, no place to buy accessories. Do not screw one on the screw interface, it will bring difficulties to the future installation. First loosely put the shelves up, and then install all the screws with a screwdriver.

This way you will get a sturdy cloth wardrobe!

In fact, mastering the method, the installation is still very simple, sinking your heart, everything is much simpler.