What should I do if the water heater does not have hot water?

The appearance of water heaters can be said to change people's bathing methods. Nowadays, the water heaters on the market are more and more functions and brands, but at the same time, the problems are gradually increasing. Today we say that the water heaters are not hot. Water problem, then what should I do? Let's take a look at how to do the water heater without hot water and why.

What should I do if the water heater does not have hot water?

There is also the problem of temperature controller tripping. Generally, the electric water heater has a double temperature controller, which is normal temperature temperature control and over temperature temperature control. These two temperature controls are a kind of water temperature control for your water heater. One of the display and control is to avoid the problem of normal temperature control and give you a trip.

There is also to see if the hot water pipe is blocked or stopped. The water stop will directly cause the water heater to be unusable, because the principle of the electric water heater is that the cold water runs against the hot water, and it is blocked whether the water inlet of the water heater is blocked. Some because the temperature control trip will directly lead to the inability to burn hot water. Calling a professional to start up quickly will be done.

The water that has not been used for several days in the water heater is generally hot water, reaching 70 ° C or above, so that the water temperature is kept at 60 ° C -70 ° C for a long time, and this temperature region is an excellent temperature for bacterial growth in water, so For example, hot water for several days or long-term use, poor water quality, bacteria, discharge, do not bathe or use to boil water, etc. Such water bathing is not good for the skin. Long-term use of this water bath may cause skin disease.

After discovering what is the problem, we must immediately do some related solutions. First of all, we must know what causes it, and then how to solve it in Xiangxiang. Let’s take a look at the water heater. What is the cause of water?

Reason one: the vacuum tube is destroyed. If some friends use a vacuum tube solar water heater, then it should be noted that the vacuum tube solar water heater in the case of sunny days in summer, the water temperature can reach the boiling point in less than two days, if not used for a long time, such as business trips, travel, make the water tank When the inside is in a state of high temperature and high pressure for a long time, the sealing ring will be aged, the aging of the polyurethane will be accelerated, the shrinkage will be caused, and sometimes the exhaust gas will not be unblocked. If the pressure is too large, the water tank will be swelled, the scale will be fouled, and the water tank will be shortened. life.

Reason 2: The tap water pressure is high. People nowadays are not very cherished for their own home appliances. Appliances like water heaters must pay attention to its environmental sanitation and temperature changes in addition to maintenance. Now the frequency of our water heaters is gradually increasing. At this time, we must pay attention to water. In the case of pressure, the water pressure is too high.

Cause three: The water pipe, valve or joint leaks. If this happens, we will need to replace some parts in time. If it is not replaced in time, the consequences will be unimaginable. Therefore, everyone must pay attention to the emergence of these small problems, and immediately stop it.

After you understand how to do this hot water heater and how to solve it, do you know how to solve it later? I hope to help you.