[ Chinese wardrobe net ] The long-term use of the wardrobe , but also related to the quality of the wardrobe installation, then how to install the wardrobe, what should you pay attention to when installing the wardrobe? The following website gives you a detailed introduction to the issue of wardrobe installation.
How to install the wardrobe?
Check the packaging: First of all, when receiving the goods, whether it is express or direct purchase, be sure to check whether the packaging is seriously damaged, if there is, it is likely that the steel pipe inside is also crushed, such goods can not be signed and purchased. . Be sure to check it out.
Check the accessories: open the package, and then check whether the accessories inside are complete, there is a manual, check the instructions on the manual, if it is less, it is estimated that it can not be installed without loading, so the number of advances is clear, so as not to be wasted. Always wear gloves when installing, and be sure to read the instructions carefully.
First install the bottom: first install the bottom one, take out the four-way joint with the bottom and the high, and connect the short tube in the middle. Install a four-way joint on each side, then install the tube on both sides, and decide the position to be placed. Install a long tube on one side and a short tube on the other. Then install the base fabric on both sides, and then install a three-way joint around each other.
Set of wardrobe cover: After installing the bottom, insert six short steel pipes, and then put the whole wardrobe cloth up against the surrounding holes. Then install a layer of the bottom of the partition, and then put it on the six steel pipes.
Install the short-side floor: If the wardrobe is divided on two sides, first install the short-side floor, first insert the side steel pipe, then install the cloth, then connect the four-way joint, then install two horizontal steel pipes, then Install the cloth and then make up the four-way connector on both sides. Repeat the baffle until it is attached to the top.
Long-side steel pipe: After the short-side partition is installed, the long side is a vertical hanging area, and a three-way joint is used to connect the two long pipes to the top.
Install the top steel pipe: After both sides are installed, connect them directly with long steel pipes, so that the wardrobe is installed. If the wardrobe is too high and not enough to squeeze, it is recommended to push the side back. So as not to be installed. At the same time, the hanging steel pipe can also be installed with a hook type joint, which is relatively simple.
Set of wardrobe cover: When the top of the large set, it is best to pull the bottom to the top, so that there is space to pull on the top, until the upper corner is installed diagonally, then the cloth cover can be pulled down. The wardrobe is now installed. After loading it, I feel that the whole wardrobe is so big. It is more than a small series of pictures. It takes an hour to install it. As long as it is careful, it will not be wrong.
What should I pay attention to when installing the wardrobe?
1, the installation of the wardrobe needs to pay attention to the size
Before installing the wardrobe, we must let the designer go to the door, be sure to communicate well with the customer, the position of the wardrobe, the size, the internal structure, and the effect of the installation. If the customer's home renovation is not completed, the customer and the decoration supervisor should also agree on some unfinished renovation projects that may affect the placement and installation of the wardrobe. For example: power switch, socket position, air conditioning installation position, whether there is plaster line, foot line, thickness of floor laying, site installation location is not enough (or standing installation) and so on.
2, install the wardrobe need to pay attention to safety
safety. Health and safety are vital to people. The beauty and beauty of the wardrobe is mainly on the sliding door, and many beautiful sliding door materials are made of art glass, which has a safety problem. Do not make the glass door too high, one is safe, and the other is easy to install.
3, pay attention to Feng Shui when installing the wardrobe
Light-colored wardrobes bring bright space and bright living space to bring a good mood to the owners. The choice and layout of the bedroom closet can be based on the orientation of the bedroom. If the bedroom door and window are facing north, the lighting and ventilation are poor, it is best to use a light-colored wardrobe. The closet should be placed in the dark corner of the corner as much as possible, not placed next to the window or the bedroom door.
The above is the knowledge about the wardrobe installation shared by the website, I hope to be helpful to everyone.
The weaving thread is the perfect thread for sewing wigs. Wig Accessories sewing thread for hair weft extension. It is breathable, strong and durable.
Best for hair decor, weaving and extensions, Ideal tool set for sewing hair weft, wig hair, hair weave extension, clip hair extension.
Thicker are durable thread which is strong enough to handle the weight of extensions of any length for months, can be used making wigs hair weft and so on.
Any questions about, how to use or products quality just contact with seller first, we will solve your porblems.
Wig Thread,Nylon Sewing Thread,Best Thread For Wig Making,Hair Extension Thread
Xuchang Le Yi De Import And Export Trade Co., Ltd. , https://www.synthetichairs.com