As a multinational corporation dedicated to researching, developing, designing, and manufacturing fully automatic bag-making, filling and sealing packaging machines, BOSSAR has recently launched a series of packaging machines to provide customers with multiple options.
BOSSAR has recently launched a series of new machines, especially the BL-2500STU bag making/capping/filling/sealing packaging machine, which immediately became a new focus of the market. Users can use this packaging machine, according to different packaging needs to choose to add top / side cover / front cover, straws, zippers and special bags and other personalized packaging. Compared to machines using prefabricated bags, on-line bag making by fully automatic bag making/filling/sealing packaging machines minimizes the circulation and storage costs of the film and, more importantly, reduces the secondary times due to multiple circulations. The possibility of pollution, and the secondary pollution caused by multiple circulations are often the main factors that damage the product quality and damage the product image.
The BL-2500STU's standard design allows the customer to perform single-station/double-station configuration on the same machine as needed. It can be switched according to the different capacities of the infusion product. The time required is short (up to two hours), and the maximum perfusion can reach 2,000 ml. , The principle of machine design can be divided into online bag making, capping, pouring, and sealing.
1. On-line bag-making The guide roller is driven by the servo motor to pull the film system. This system avoids wrinkles and unnecessary over-stretching of the film during stretching, and effectively adjusts the film tension dynamically. The machine completes the bottom sealing and vertical sealing process of the bag online, and controls the automatic punching of the film and the width of the bag cut through the identification of the film color mark. In order to meet the needs of different customers, the machine also set aside additional installations such as easy tearing, rounding devices, hanging holes, punching devices for special-shaped bags, etc.; independent bag cutting device cuts the bag into the next process .
2. Capping The caps can be placed in the storage bins out of order. The lids are arranged in order by vibrating feeders. The specially designed mechanical gripping system places the lids in the set position and is welded firmly into the next process.
3. Perfusion In order to increase the perfusion rate, the BL-2500 STU duplex machine is equipped with four perfusion heads. The perfusion process is performed in two steps. Each time the perfusion bag is filled with 50% capacity, BOSSAR is also designed for granular or viscous products. Special injection nozzles are used to ensure the quality of perfusion. The bagless non-irrigation system equipped with the machine is controlled by the PLC according to the sensor signal of the bag opening station. The unopened bag is removed by the chuck.
4. Seal sealing quality is an important factor that directly affects the leakage of the product. BL-2500STU bags from the bag to the top seal process are in a stable state, the top seal area does not stick to the product; double top seal better guarantee the sealing quality, prevent Leakage occurs. In addition to this, the top seal area is always dry and does not cause product contamination, and it can be automatically retracted for easy cleaning and maintenance.
DELIN HAIR COSMETICS , https://www.hairdyecolorfactory.com