Part III: Feiteng Advanced Operation and Parameter Setting Problems
Q: How Do I Change the FIT Entry Break?
Answer: After Federite is installed, the default entry separator is 0aaa8. However, there are usually users who do not want to use this separator. If you need to modify, you can open the fit.ini file, find the TABLESEP= under FANGZHENG, and fill in the specified interval character after the equal sign. For example, the full-width space is TABLESEP=0a1a1.
Q: After modifying the fit.ini file, do not use it to take off?
A: Make sure to take off after modifying fit.ini. It is recommended that general users do not arbitrarily modify the FIT.INI file.
Q: Why in the Feiteng 4.0, enter the font number option in the font number. For example: 5H or 5FZHT report parameters are invalid. Works in version 3.1.
A: Please check the userfont.ini in the fit directory. This is where the font's collation is recorded and can be modified.
Q: How to solve the problem that the TIF black-and-white binary image in the compression format automatically contains too large a file?
Answer: The black and white binary map can not be automatically included by modifying the FIT.INI settings. By writing in Fit.ini:
[IMAGEINCLUDE] IsIncludeBitmapTiff =0
Note: After the black and white binary image is set to be not included, if the image color is set in the image parameter, the color will become black after posting.
IsIncludeBitmapTiff =1 or there is no such field, and the black and white binary map is automatically included as it is.
After Feiteng installation, the default state is "Black and White Binary Chart with Automatic Compression Format".
Q: Editing system + online FIT 4.0. FIT How to set the auto save time.
Q: The FIT editing interface changes the FIT auto-save time: Modify the CHB.INI file in the FIT directory.
Q: Feiteng 3.1 automatically joins the ranks. In addition to the default note, if the use of paragraphs is possible, what is the code when installing Q: There is tablesep=0aaa8 in the fit.ini, which defines the table separator and can be modified. With regard to the inner code of the table interval character to be defined, this character can be input in Feiteng, and after blackening, the inner code of the character can be displayed in the Feiteng state bar. But not all characters can define table breaks.
Q: I use Feiteng 3.1 Second Edition. When I make a version, I only need to load photos in photoshop and add clipping paths. The purpose is to make the unnecessary part of the picture transparent and stored in tif format. However, once you tune into the fly, it will automatically exit or simply exit when you see the preview fly.
Answer: FeiTeng version 3.12 or later does not support the JPEG format generated by photoshop6.0. Please use photoshop 5.02, or use Feiteng 4.0.
Q: Feiteng's own help tutorial says that when using Founder RIP, you have to select “convert to 748 yardsâ€. But I used the Founder RIP for several times and didn't turn it into "748 yards." Why did I send it successfully?
Answer: The RIP of Founder includes PSP31, PSPPRO, PSPNT. In PSPPRO and PSPNT, the 748 and GB words have been combined together, while the PSP31 has only 748 words, so the "PSP31 raster interpreter" is only available in the Feiteng environment settings. Options.
Q: What is the role of total overprint black and maintaining OPI links?
Answer: 1 The black version of the overprint means that the black version is pressed on top of other colors and not hollowed out. This general publication is the default;
2OPI is generally only used by foreigners to develop typesetting software. Founder series software does not need this function, so do not select it. The other user is worthless.
Q: Feiteng cannot rotate the inserted S2, S72, PS2. Is there any way to achieve rotation?
A: The solution is to insert this file, and then send a part of the generated PES file, and then insert the EPS file into the layout that can be rotated.
Q: Feiteng 3.1 can't recognize the digital body black square (F2) defined in the book.
Answer: This is indeed the case. Feiteng 4 can support F2 for WT annotations.
Q: Feiteng 3.1 inserts the WORD table, which cannot be exported when output on the RIP.
A: This situation is due to the size of the WORD table being adjusted in Feiteng. If you want to directly adjust the table size in Feiteng, use the "Select" tool to select the table, and then select "Partial Distribution" under the "File" menu. The EPS file is inserted into the layout of the fly and the size of the table is adjusted.
Q: FIT3.1 loses the table edges when it outputs after installing the OLE patch.
Answer: It is recommended not to use an insert object when inserting a WORD document. Instead, use the direct COPY method.
Question: In Feiteng 3.1, there are tables copied in WORD. When output, the punctuation marks in the table become avatars.
Answer: If this problem occurs, please download the OLE program at http://service.founder.com.cn and follow the Readme instructions to solve the problem.
Q: Feiteng 4.0 can't color the color chart?
Answer: To draw the graph in the fly, it must be in TIF or EPS format.
(to be continued)
Q: How Do I Change the FIT Entry Break?
Answer: After Federite is installed, the default entry separator is 0aaa8. However, there are usually users who do not want to use this separator. If you need to modify, you can open the fit.ini file, find the TABLESEP= under FANGZHENG, and fill in the specified interval character after the equal sign. For example, the full-width space is TABLESEP=0a1a1.
Q: After modifying the fit.ini file, do not use it to take off?
A: Make sure to take off after modifying fit.ini. It is recommended that general users do not arbitrarily modify the FIT.INI file.
Q: Why in the Feiteng 4.0, enter the font number option in the font number. For example: 5H or 5FZHT report parameters are invalid. Works in version 3.1.
A: Please check the userfont.ini in the fit directory. This is where the font's collation is recorded and can be modified.
Q: How to solve the problem that the TIF black-and-white binary image in the compression format automatically contains too large a file?
Answer: The black and white binary map can not be automatically included by modifying the FIT.INI settings. By writing in Fit.ini:
[IMAGEINCLUDE] IsIncludeBitmapTiff =0
Note: After the black and white binary image is set to be not included, if the image color is set in the image parameter, the color will become black after posting.
IsIncludeBitmapTiff =1 or there is no such field, and the black and white binary map is automatically included as it is.
After Feiteng installation, the default state is "Black and White Binary Chart with Automatic Compression Format".
Q: Editing system + online FIT 4.0. FIT How to set the auto save time.
Q: The FIT editing interface changes the FIT auto-save time: Modify the CHB.INI file in the FIT directory.
Q: Feiteng 3.1 automatically joins the ranks. In addition to the default note, if the use of paragraphs is possible, what is the code when installing Q: There is tablesep=0aaa8 in the fit.ini, which defines the table separator and can be modified. With regard to the inner code of the table interval character to be defined, this character can be input in Feiteng, and after blackening, the inner code of the character can be displayed in the Feiteng state bar. But not all characters can define table breaks.
Q: I use Feiteng 3.1 Second Edition. When I make a version, I only need to load photos in photoshop and add clipping paths. The purpose is to make the unnecessary part of the picture transparent and stored in tif format. However, once you tune into the fly, it will automatically exit or simply exit when you see the preview fly.
Answer: FeiTeng version 3.12 or later does not support the JPEG format generated by photoshop6.0. Please use photoshop 5.02, or use Feiteng 4.0.
Q: Feiteng's own help tutorial says that when using Founder RIP, you have to select “convert to 748 yardsâ€. But I used the Founder RIP for several times and didn't turn it into "748 yards." Why did I send it successfully?
Answer: The RIP of Founder includes PSP31, PSPPRO, PSPNT. In PSPPRO and PSPNT, the 748 and GB words have been combined together, while the PSP31 has only 748 words, so the "PSP31 raster interpreter" is only available in the Feiteng environment settings. Options.
Q: What is the role of total overprint black and maintaining OPI links?
Answer: 1 The black version of the overprint means that the black version is pressed on top of other colors and not hollowed out. This general publication is the default;
2OPI is generally only used by foreigners to develop typesetting software. Founder series software does not need this function, so do not select it. The other user is worthless.
Q: Feiteng cannot rotate the inserted S2, S72, PS2. Is there any way to achieve rotation?
A: The solution is to insert this file, and then send a part of the generated PES file, and then insert the EPS file into the layout that can be rotated.
Q: Feiteng 3.1 can't recognize the digital body black square (F2) defined in the book.
Answer: This is indeed the case. Feiteng 4 can support F2 for WT annotations.
Q: Feiteng 3.1 inserts the WORD table, which cannot be exported when output on the RIP.
A: This situation is due to the size of the WORD table being adjusted in Feiteng. If you want to directly adjust the table size in Feiteng, use the "Select" tool to select the table, and then select "Partial Distribution" under the "File" menu. The EPS file is inserted into the layout of the fly and the size of the table is adjusted.
Q: FIT3.1 loses the table edges when it outputs after installing the OLE patch.
Answer: It is recommended not to use an insert object when inserting a WORD document. Instead, use the direct COPY method.
Question: In Feiteng 3.1, there are tables copied in WORD. When output, the punctuation marks in the table become avatars.
Answer: If this problem occurs, please download the OLE program at http://service.founder.com.cn and follow the Readme instructions to solve the problem.
Q: Feiteng 4.0 can't color the color chart?
Answer: To draw the graph in the fly, it must be in TIF or EPS format.
(to be continued)
Industrial Electric Linear Actuator
Solar tracking linear actuators are being used widely in different applications. UPLIFT is one of the leading manufacturers of standard solar actuators in China, with several years of experience .
We have different types of actuators specific designed for solar tracking applications to deliver optimal performance.
Most outstanding advantages of our solar actuator: high precision,anti-rust performance,high durability,extrodinary load capacity. Those features make linear actutor for solar tracking system works far better and suitable for varisou applications.
Industrial Electric Linear Actuator,100Mm Linear Actuator,Actuator Electrical Linear,Linear Actuator Remote,Linear Actuator High Speed
Suzhou Uplift Intelligent Technology Co., Ltd , https://www.uplifting-desk.com