Common wardrobe custom trap

[ Chinese wardrobe network ] Now is the time of decoration. There are many consumers who choose to customize the wardrobe . In the current wardrobe market, there is a phenomenon in which manufacturers deceive consumers in order to make profits. Therefore, Xiao Bian advises everyone to understand the relevant knowledge before choosing to order the wardrobe, to avoid falling into the consumption "trap" set by the manufacturer. Common wardrobe custom traps have the following aspects:

First, use low-grade thin materials to shoddy.

For example, the thickness of the closet door, some manufacturers to use material to save material costs, using thinner plates (8mm or even 6mm) instead. The door panel that is too thin is frivolous and swaying, and the stability is poor. After using it for a period of time, it is easy to warp and deform, and the guide rail is stuck, which causes the sliding and pulling to be unsmooth and affects normal use.

Second, the use of poor and harmful materials, regardless of environmental standards.

The plates for sliding doors (mainly fiberboard and particleboard) are mostly wood-based panels, and the adhesives used contain harmful substances such as formaldehyde. The unqualified wardrobe manufacturers on the market use the poor quality plates produced by the cottage factory. The formaldehyde content is seriously exceeded, which will cause pollution to the home environment (the release time of formaldehyde is about 3 to 15 years). Especially in the cold season in the north, the doors and windows are closed, which has a more serious impact on the health of consumers. The plate products used by the regular custom wardrobe manufacturers are environmentally friendly to at least E1 (ie, the formaldehyde content is less than or equal to 0.8 mg/L). The formaldehyde content of the Federal Gordon sheet is far superior to the E1 standard, which ensures the health of consumers.

Third, the key technologies are backward and the product durability is poor.

For example, the edge sealing technology is an important means to prevent formaldehyde from escaping in the sheet. Good custom closet, tightly sealed, smooth, no color difference, and integrated with the wardrobe; and the custom-made products with poor edge sealing technology, the edge is easy to fall off, the edges are not flat, easy to black lines, and there is obvious color difference. Another example is the pulley of the door, which is the key technical component of the sliding door. The pulleys of the regular custom wardrobe brand on the market are made of carbon fiberglass, which contains roller bearings, which are smooth and durable, and have long-lasting wear resistance. They are equipped with two anti-jump devices to ensure safe and reliable sliding of the doors. The pulleys of some low-grade wardrobe doors are made of organic plastic, which are easy to wear and deform. Over time, the doors and doors are ups and downs when pushing and pulling, and there is only one or even no anti-jumping device. When pushing and pulling, the doors are easy to derail. Safety.

Fourth, the sky is asking for price, you can lie to lie.

Manufacturers with poor business ethics are arbitrarily bidding for customers, and they are tempted to slaughter and slaughter. The offer is seriously deviated from the product value. Some brand products often have regional uniform sales prices, and even if they are promotional, there are uniform discount rules to ensure customers' consumer rights.

Fifth, the concept of fuzzy brand, the goods are not right.

When a customer asks for a product brand or a place of origin, some of the shopping guides respond with an imported brand or a high-end brand. When asked specifically about where the door panels, panels and frames are produced, they are ambiguous.

Sixth, counterfeit brand name, illegal operation.

Individuals with weaker strengths, in order to speed up, regardless of legal regulations, publicly misappropriate pictures of their peers from competitors' websites or promotional materials, and even steal brand-name trademarks and engage in illegal business activities. When consumers order a wardrobe, they can carefully study the manufacturer's information and check whether they have a sales qualification certificate such as a power of attorney to reduce unnecessary disputes in the future.

Seventh, after-sales service is insufficient to follow up, and the promise cannot be fulfilled.

The custom-made wardrobe manufacturer with poor strength, in order to take orders before the sale, may promise the customer a warranty, wait until the customer finds problems in use, needs to be repaired, the merchants may not listen, or push the three, or just cope, all kinds of The service problem is exposed. Therefore, it is recommended that consumers should fully understand the strength of the manufacturer before ordering, and find out the warranty period. After the product is installed, ask for the product warranty card. The Federal Gordon After-sales Warranty Card is mailed out from the factory headquarters to prevent possible sales vulnerabilities, allowing users to have a basis for inspection and completely protect the interests of consumers.

Solid Filler Cosmetic Pen

We have many different kinds of solid filler Cosmetic Pen.

We promise out standing service tailored to meet your demands. Our products are favored by many customers all over the world and are sold in Europe, North America, South America and Asia.
We are looking forward to your E-mail and establishing cooperative relationship with you! We would provide professional cosmetic pen with good services for you.

Solid Filler Cosmetic Pen, Solid Concealer Pen, Solid Filler Cosmetic Pencil

ims Packaging Limited , https://www.ims-cosmetic-packaging.com