[ Chinese wardrobe network ] Whether the overall wardrobe is environmentally friendly and durable is the two most important indicators, and the key to the overall wardrobe selection. Today, I would like to share with you the matters needing attention when purchasing an environmentally friendly overall wardrobe, as well as the overall wardrobe environmental rating E0, E1, E2 F ★ ★ ★ ★ standard.
Let's take a look at the environmental protection level of the overall wardrobe.
The overall wardrobe environmental rating is mainly E0, E1, E2 F ★ ★ ★ ★ standard
Initially, the two standards E1 and E2 were produced in Germany, and later introduced as European standards. On July 1, 2002, China promulgated and implemented the “10 mandatory national standards for hazardous materials for interior decoration materialsâ€, which is E1. At the E2 level, China's current national highest standard is E1, and many furniture on the market can meet this standard;
The E0 standard is produced in Japan and is the most demanding environmental standard, equivalent to the highest European standard E (1/2);
"F4 Star" is derived from the laws and regulations of the Ministry of Agriculture and Forestry of Japan. It is actually the "F☆☆☆☆ certification standard" of Japan. It is the highest level of health in Japanese flooring standards and is considered to be the healthiest flooring standard in the world. If you look at the usual E1 and E0 standards, then the "F3 star" is equivalent to the national E0 standard. It is recommended to limit the area of ​​use. The "F4 star" is much higher than the "F3 star", and there is no limit on the area of ​​use.
Let's take a look at the considerations for choosing an environmentally friendly wardrobe:
The first point: the most important part of the environmentally-friendly sheet of the main material of the sheet is composed of solid wood granules and plant fibers. If this part is not environmentally friendly, then the sheet is naturally not environmentally friendly or healthy. .
The second point: look at the environmental protection of the glue. The board itself has no problem, it depends on whether the glue is environmentally friendly. The plates are processed and then bonded with glue. The environmental protection and thickness of the glue also determine the environmental performance of the board to a certain extent. Judging the standard is to see if the manufacturer has aldehyde-free glue and the content of free formaldehyde in the test plate.
The third point: look at the water resistance of the board. Pour the water on the board. Repeat the friction after ten minutes to see if the surface will open, lift, wrinkle, etc.. If these conditions occur, it can be judged as a waste sheet.
The fourth point: look at the flatness of the surface of the sheet is rougher, indicating that there are holes, gaps or debris under the board, so the quality of the board will be unsatisfactory. The good plate is full, flat and thick, and the rubber layer is a straight line.
The fifth point: look at whether the surface of the sheet is neat and tidy. When the surface of the sheet is contaminated, wrinkled, vacant, scar, etc., it is undoubtedly the second board. Good surface finishes are neat and tidy, and there are no such problems. Sixth point: Look at the thickness of the rubberized board. Move the whole large plate halfway and fix it. Press it hard to see if it is strong. The more powerful the plate loadability is, the better.
Under normal circumstances, the thinner the rubberized board is (the bearing capacity is lower under 1.5MM, and the short life is below 1MM.) The poorer the bearing capacity.
Man Purse,Man Purse Bag,Mens Wallets,Mens Card Holder
Dongyang Bestway Leather Co.,Ltd , https://www.aurorafashion-cn.com