Unpowered amusement product supervision short board Safety accidents are shocking
The non-powered amusement products are not only used for large-scale amusement facilities as defined in Article 88 of the “Regulations on the Safety Supervision of Special Equipment†under the State Council’s Decree No. 373, and are not applicable to the National Toy Safety. The technical specifications "GB6675-2014 national mandatory standards stipulate products, mainly including small sliding, jumping, climbing, swaying, rotating, drilling, tumbling, comprehensive combination and other products, the main use of places concentrated in kindergartens, residential areas. With the country's emphasis on pre-school education, more and more public kindergartens have allocated necessary amusement products such as slides and swings through government procurement. Private kindergartens and some early education institutions and communities have also equipped amusement products through self-purchasing. . The rapid increase in demand has led to the rapid development of production companies from the initial dozens to more than 600. However, there are no national compulsory product standards, the particularity of products, the particularity of channels, and the difficulty of supervision by the government. This has led some unscrupulous enterprises to seize the market with low-priced and inferior products, and even participate in government bidding, which not only seriously disrupts the industry order. There are also major safety hazards in children's activities such as kindergartens and communities. According to media reports, children’s casualties caused by the quality and safety of outdoor playground products in kindergartens are different from the damage that can be caused by ordinary products. These injuries are particularly serious, including 10 deaths and serious injuries. Since the first incident, the consequences have been extremely serious, and it has caused irreparable damage to the families of the victims. The government and the society attach great importance to it and pay close attention to it. Industry enterprises should pay more attention to it.
The quality inspection department supervises the production of the product. Due to the difficulty of sampling the product, the difficulty of testing, and the high detection cost, it is difficult to implement supervision. The industrial and commercial department supervises the circulation of products, and the products purchased by the government and the products directly purchased by the users cannot be supervised, even if The purchase of the corresponding products in the distribution channel is also difficult to implement because of the particularity of the products; the non-powered amusement products are not special equipment, nor the scope of supervision of the safety supervision department; the education department is the competent unit to ensure the safety of the kindergarten. The purchaser of public kindergarten amusement products is also difficult to assess and guarantee product safety without scientific and objective product quality assurance. At present, there is no effective way to supervise the unpowered amusement area, so the importance of the unpowered amusement product alliance certification is self-evident.
The two companies were awarded the first batch of certificates.
In order to implement the "Quality Development Outline (2011-2020)" and "Guiding Opinions of the CPC Central Committee and the State Council on Conducting Quality Ascension Actions", strengthen the quality management of unpowered amusement products, comprehensively improve the quality of non-powered amusement products, and recognize the state in the country. Under the guidance of the committee, China Games Association organized China Quality Certification Center and Beijing China Light Union Certification Center to jointly produce non-powered amusement products. Since June 2015, it has launched unpowered amusement product certification in the industry and has completed The Unpowered Amusement Facility Alliance Certification Rules has established and determined the certification style and certification mark.
This year, China Quality Certification Center and Beijing China Lightlink Certification Center started the alliance certification work, respectively, and cooperated with Zhejiang Education Toy Product Quality Inspection Center and Rhine Technology (Shanghai) Co., Ltd., with Yonglang Group Co., Ltd. and Jiangsu Baole. Industrial Co., Ltd. for the pilot, sorted out the certification process, carried out type testing and initial factory inspection, discussed and discussed the problems in the certification, and completed the pilot work in recent days, and issued the first batch of certificates to the two enterprises.
At present, all preparations for the Alliance Certification are in place, and it is hoped that the certification company will be able to apply from now on. The alliance certification adopts different certification bodies and testing organizations designated by the China Games Association, uses the same certification rules, the same certification mark, and the independent working methods of certification. Each enterprise can arbitrarily select the designated certification body and testing organization for certification according to its own needs. To avoid the monopoly of exclusive certification; China Toys and Baby Products Association, as the lead unit of the alliance certification, is responsible for the group's guarantee of scientific, open, fair, standardized and continuous development.
Continuous quality assurance is the top priority of the alliance certification. The certification body and the China Games Association jointly supervise the double insurance.
The non-powered amusement product alliance certification is based on the relevant national laws, regulations and standards. According to the characteristics of product quality and safety supervision, the voluntary product certification is implemented according to the unified alliance certification rules.
The China Quality Certification Center and China Lightlink Certification Center, which are responsible for certification, are rich in product certification (including national compulsory product certification, voluntary product certification) work experience, with a group of experienced certification management personnel, but also domestic toys. Product country compulsory certification of the main certification body. The units responsible for product testing include Rheinland Technology (Shanghai) Co., Ltd., an internationally renowned testing organization, and Zhejiang Educational Toys Product Quality Inspection Center. They all have professional testing equipment and capabilities for children's slides, swings and children's slides and swings. It can provide objective, fair and accurate test results for product testing.
The certification mode adopts type test + initial factory inspection + post-certification supervision, which not only sets basic requirements for initial product quality, but also puts forward higher requirements for the factory's continuous quality assurance capability.
Alliance certification through the initial factory inspection to comprehensively assess the quality assurance capabilities of the factory, in particular, the list of necessary production equipment and inspection equipment that the certification unit should have, and eliminate the possibility of unqualified trading companies and procurement companies from the source. Ensure that the certified company is an enterprise with real production capacity guarantee.
In order to ensure the consistency of the products actually sold by the enterprise and the products that have been certified and tested, the alliance certification rules specifically stipulate that the certification body is responsible for organizing the implementation of the supervision and inspection activities after the certification, and regularly conducting a “physical examination†for the certified products. Including follow-up inspection of factory quality assurance ability assessment, product consistency checking, product sampling, the user site supervision and inspection (if necessary). When the certification body certified products and can not confirm the user authentication application field application filing exactly the same product or other certification bodies are reasonable grounds to believe it is necessary to go when the user site, arrangements shall apply for certification to the certification body together with the user site, collaborative certification agencies to complete confirmation of the consistency of certified products. In general, the first supervision and inspection shall be carried out within 12 months from the date of issuance of the first certificate, and every 12 months thereafter.
Play Association in attendance at required supervision and inspection to ensure that factories continue to ensure product quality. The status of the certificate is published in the “Quality China†channel “Affiliate Certification†section of the China Toys and Baby Products Association official website () to ensure the openness, transparency and certificate of the certification results; after obtaining the certificate, playing in the Association for certified products issued authorization to use the certification mark, certification mark to prevent abuse.
No power class recreational products Alliance certification logo:
Alliance certification, supervision, government, society, comprehensive attention, building a shield for child safety protection
The launch of the unpowered amusement product alliance certification is the seed of children's life safety guarantee. Only when the government, society and consumers recognize the importance of alliance certification and regard it as an indispensable safety factor for unpowered amusement products, When widely recognized, the towering tree of children's life safety can thrive.
It is understood that in the process of government bidding and procurement, the kindergarten's non-powered amusement products and other related products are usually packaged and purchased, and the bidding agency provides relevant materials to prove the quality of the products. However, due to the variety of educational toys, the product standards of different products are different, making it difficult for the personnel of the relevant tendering agencies to judge the applicability and effectiveness of the product quality inspection report, resulting in the detection of slides and swing products issued by many enterprises when bidding. The report is based on the standard test of ordinary toys rather than the test report issued by the corresponding slide and swing product standards. These slides and swing products that are not tested by the corresponding standards cannot meet the requirements for outdoor play and use, and cannot be used for children. Play provides security. In the process of government tendering, the certification of the unpowered amusement product alliance will be adopted to effectively solve the above problems.
In addition, when private kindergartens, communities, and playgrounds purchase non-powered amusement products, they should also give priority to products that have obtained certification and attached certification marks. At present, many slides are a combination of different components. Some agents are profit-seeking. By purchasing low-priced components, they can be combined and sold without any inspection. As a non-professional user, after receiving the product, it is impossible to distinguish the quality of the product from the appearance, which not only seriously disturbs the order of the industry, but also poses a huge safety hazard for the more playful children.
Parents who are direct guardians of children can better play the role of social supervision by identifying the alliance certification mark. Only by letting children play in the unpowered amusement products certified by the alliance can they avoid the safety accidents of the baby during play.
Voluntary alliance certification is different from compulsory certification. Enterprises are voluntary applications and voluntary certifications. Only those companies that are truly confident in their products and are willing to be responsible for the safety and health of children are willing to participate actively, reflecting the social responsibility of enterprises.
Product certification is an internationally effective means to ensure quality and safety from the source, and is an important tool for transmitting trust, guiding consumption, and promoting industrial development and progress. Through the alliance certification, the non-powered amusement product manufacturers will jointly protect children's life health and safety, and deliver positive social energy!
We specialized in developing, manufacturing and trading of BBQ grills and series of metal & plastic products since 2010. Our main products are Portable BBQ Grill, Folding BBQ Grill, Camping Stove , Rotating Grill, Electric Grill, Fire pit BBQs. BBQ Grills allow you to enjoy the happy time with your families,friends.
durable bbq grill,garden bbq grills,korean bbq grills,amazon bbq grills,bbq stove
TAISHAN YUEXIN INDUSTRIAL GROUP LIMITED , https://www.gdmetalproducts.com