The cleaner the paper, the longer the print cleaning cycle. If C1S/C2S is part of your paper, you should go to the paper mill and look for a paper mill that has a good internal sanitation environment for the good printing that you use. Because some paper mills, due to poor sanitation, pollutants have fallen into the machine and random machines have run into the paper. These contaminants stick to the rollers during printing, allowing the printer to either stop the cleaning machine or reduce the viscosity of the ink. To some extent, the extent to which paper mills produce clean paper also depends on the formulation of the paint. Coatings made of strong binders can reduce the amount of paper dust.
Good C1S/C2S paper should always be consistent. However, consistency cannot be maintained if the paper is curled, rolled and wrinkled. A piece of paper may lose space stability due to improper fiber composition, improper drying, unstable humidity, and the like. Good fiber composition refers to the balance between long and short fibers, long fibers make a stable but rough paper, and short fibers make a smooth but fragile paper. Printers should consider using paper made from a mixture of two fibers. If the balance of the two fibers is well controlled, the paper produced will be both smooth and resilient and stable.
Unstable humidity is another cause of the paper's spatial stability, which is often caused by insufficient internal control of the entire papermaking shop. The higher the degree of automation in paper mills, the lower the chance of this happening. Although there are many paper mills that use scanning control equipment and some even use more automated equipment throughout the production process, it only contributes to the consistency of the final product. .
Light and brightness
Paper brightness and lightfastness, or paper that turns yellow over time, also have different effects on your printing. Lightfastness is affected by the composition of the paint. If paper mills use dyes or optical brighteners, the paint will fade over time.
On the contrary, if the pigment is used, the paper is a real "white" paper. The customer's concern is the firmness and longevity of using pigments to adhere color to paper. The two main pigments used in the paper industry are clay and calcium carbonate. C1S paper using clay is a matter of recent years, brightness can reach about 82, Tango Paper introduced that it used calcium carbonate in 1997 to make C2S paper white, brightness of 88. Today, several paper mills use different schemes to achieve the same brightness on different C1S papers.
Leather Chair,Leather Lounge Chair,Leather Desk Chair,Brown Office Chair
Feat Top International(China) CO.,LTD , https://www.nbfeattop.com