Since November, the Mengyin County Bureau of Quality and Technical Supervision has organized administrative law enforcement personnel and measurement technicians to in-depth production enterprises, workshops, supermarkets, shopping malls, bazaars, and shops, as well as seasonal merchandise for production and distribution in the Mengyin area. Foods that are closely related to people’s daily lives and those that consume relatively large amounts, such as: cakes, alcohol, beverages, edible vegetable oils, convenience foods, condiments, flour, rice, meat products, quick-frozen products, fruits, canned foods, The actual net content of quantitatively packaged goods, such as roasted seeds and groceries, and the labeling of the net content of product labels, were measured and enforced by inspections and inspections. At present, 65 batches of quantitatively packaged goods have been inspected and 60 batches have been qualified. The batch pass rate is 92.3%.
Through examination, it was found that the main reasons for the unqualified measurement of quantitatively packaged goods are: First, some enterprises and distributors have weak awareness of the legal system, and little is known about the relevant national laws, regulations, regulations and related knowledge, especially for quantitative packaging of goods. The lack of understanding of the net content allowable deviation and the net content labeling requirements. Second, some enterprises have relatively backward production technology and management, and the selection and use of measuring instruments is unreasonable. The precision level and accuracy of net content detection instruments are not up to the requirements, and the necessary measurement and control measures are lacking. Some did not formulate and implement a corresponding measurement control management system and a net content inspection system before delivery. Before the product was shipped, there was no, little or no check whether the net content of the product met the standard requirements. Third, some dealers did not implement the purchase acceptance system. They did not check or check strictly whether certain goods were purchased or not, and some even asked whether the measurement of quantitatively packaged goods was accurate or not. They thought that if the goods were cheap, they would only sell if they wanted to. It does not matter if they are accurate. In the daily consumption, a considerable number of consumers have neglected the measurement problems of packaged goods (quantitatively packaged goods), and most of them have not checked whether the actual net content is in line with the net content indicated in the standard. In light of the above-mentioned problems and phenomena found in law enforcement inspections, the Mengyin County Bureau of Quality Supervision reminds consumers that when purchasing a packaged product, please pay attention to the following seven aspects:
The first is to try to buy goods from reputable supermarkets and shops. These malls have stricter control over their purchase.
The second is to carefully check whether the manufacturer of the product is a large or medium-sized enterprise. Under normal circumstances, the qualified rate of product measurement for large and medium-sized enterprises is relatively high.
The third is to see whether or not the “C†mark of the quantitative packaged goods measurement is printed on the outer package of the quantitative packaged goods. The “C†(the first letter of English in China) mark is a qualified mark for the quantitative packaged goods manufacturer. Quantitatively packaged goods with a “C†sign indicate that their net content is guaranteed and is a commitment of the production company to consumers.
The fourth is to check whether the net content is clearly marked in the prominent position of the outer package; whether the packaged goods are marked with the net content of each type of goods; whether the multiple packaged goods are marked with the net content and total number of small packaged goods; For solid and liquid two-phase goods (such as canned food, bottled food, etc.), besides indicating the net content by quality, whether the content of solids is also indicated by quality or percentage. At the same time, check the package for leaks, breakages, etc. Do not buy packages that have been damaged.
The fifth is to understand as much as possible the mastery of the national requirements for measurement tolerances, in particular the Measures for the Administration of Quantitative Packing Commodity Measurement and Supervision, the Rules for the Inspection of Net Content of Prepackaged Commodities, and the Measures for Commodity Measurement and Illegal Conduct issued by the General Administration of Quality Supervision, Inspection and Quarantine (AQSIQ). "Penalty Regulations" and other relevant regulations and related knowledge. Sixth, it is necessary to estimate and check whether the negative deviation of the actual net content and the net content of the product exceeds the allowable error by referring to a fair scale. Seventh, when there is a contradiction between the inaccurate measurement problem and the seller, it is necessary to dial 12365 to complain to the local quality supervision department.
Through examination, it was found that the main reasons for the unqualified measurement of quantitatively packaged goods are: First, some enterprises and distributors have weak awareness of the legal system, and little is known about the relevant national laws, regulations, regulations and related knowledge, especially for quantitative packaging of goods. The lack of understanding of the net content allowable deviation and the net content labeling requirements. Second, some enterprises have relatively backward production technology and management, and the selection and use of measuring instruments is unreasonable. The precision level and accuracy of net content detection instruments are not up to the requirements, and the necessary measurement and control measures are lacking. Some did not formulate and implement a corresponding measurement control management system and a net content inspection system before delivery. Before the product was shipped, there was no, little or no check whether the net content of the product met the standard requirements. Third, some dealers did not implement the purchase acceptance system. They did not check or check strictly whether certain goods were purchased or not, and some even asked whether the measurement of quantitatively packaged goods was accurate or not. They thought that if the goods were cheap, they would only sell if they wanted to. It does not matter if they are accurate. In the daily consumption, a considerable number of consumers have neglected the measurement problems of packaged goods (quantitatively packaged goods), and most of them have not checked whether the actual net content is in line with the net content indicated in the standard. In light of the above-mentioned problems and phenomena found in law enforcement inspections, the Mengyin County Bureau of Quality Supervision reminds consumers that when purchasing a packaged product, please pay attention to the following seven aspects:
The first is to try to buy goods from reputable supermarkets and shops. These malls have stricter control over their purchase.
The second is to carefully check whether the manufacturer of the product is a large or medium-sized enterprise. Under normal circumstances, the qualified rate of product measurement for large and medium-sized enterprises is relatively high.
The third is to see whether or not the “C†mark of the quantitative packaged goods measurement is printed on the outer package of the quantitative packaged goods. The “C†(the first letter of English in China) mark is a qualified mark for the quantitative packaged goods manufacturer. Quantitatively packaged goods with a “C†sign indicate that their net content is guaranteed and is a commitment of the production company to consumers.
The fourth is to check whether the net content is clearly marked in the prominent position of the outer package; whether the packaged goods are marked with the net content of each type of goods; whether the multiple packaged goods are marked with the net content and total number of small packaged goods; For solid and liquid two-phase goods (such as canned food, bottled food, etc.), besides indicating the net content by quality, whether the content of solids is also indicated by quality or percentage. At the same time, check the package for leaks, breakages, etc. Do not buy packages that have been damaged.
The fifth is to understand as much as possible the mastery of the national requirements for measurement tolerances, in particular the Measures for the Administration of Quantitative Packing Commodity Measurement and Supervision, the Rules for the Inspection of Net Content of Prepackaged Commodities, and the Measures for Commodity Measurement and Illegal Conduct issued by the General Administration of Quality Supervision, Inspection and Quarantine (AQSIQ). "Penalty Regulations" and other relevant regulations and related knowledge. Sixth, it is necessary to estimate and check whether the negative deviation of the actual net content and the net content of the product exceeds the allowable error by referring to a fair scale. Seventh, when there is a contradiction between the inaccurate measurement problem and the seller, it is necessary to dial 12365 to complain to the local quality supervision department.
Digital derma stamp pen, 6 speeds Dr.pen,lcd display electric derma stamp,micro needing pen,auto electric pen ,skin care pen,ultima Dr.pen,electric microneedling pen,auto microneedling stamp
Digital derma stamp pen, 6 speeds Dr.pen,lcd display electric derma stamp,micro needing pen,auto electric pen
Guangzhou Vantee Electronic Technology Co., Ltd. , https://www.finerroller.com