Recycling promotes the harmony of plastic packaging materials and the environment (2)

2.4 China

In the past decade or so, China has enacted a series of large and small laws and regulations.

· In 1996, the State promulgated the "Law of the People's Republic of China on the Treatment of Solid Wastes," which clearly stipulates that disposable plastic packaging should use products that are easy to recycle, easy to dispose, or easy to absorb in the natural environment.

· In July 1996, the Ministry of Railways banned the use of foam plastic lunch boxes at all railway stations across the country; the Ministry of Health also notified that the manufacturer of plastic food packaging will no longer be approved in the future, and gradually reform, limit and eliminate non-degradable plastic snacks. Box production.

· In September 1998, the State Environmental Protection Administration, together with the Ministry of Construction, the Ministry of Communications, and the National Tourism Administration jointly issued the “Several Opinions on Strengthening the Management of Waste Plastic Packaging Waste in Key Traffic Routes, Watersheds, and Scenic Spots”, which is prohibited at railway stations and passenger trains. Disposable foam plastic utensils are used on passenger ships and cruise ships that are shipped in inland waters such as the Yangtze River and Taihu Lake.

· In December 1999, the State Economic and Trade Commission jointly announced with the National Quality and Technical Supervision Bureau, the Ministry of Science and Technology, and the Ministry of Health the two national standards of "General Specifications for Disposable Degradable Catering Tools" and "Test Methods for Degradation Performance of Disposable Degradable Catering Sets". Since January 1, 2000, it has been implemented to provide a unified technical basis for the supervision of the production, sales and use of disposable degradable tableware in China.

·In April 2001, the State Economic and Trade Commission issued the "Emergency Notice on the Immediate Stopping of the Production of Disposable Plastic Foam Tableware." All production enterprises (including domestic investment, foreign investment, and Hong Kong, Macao and Taiwanese investment companies) are required to stop producing disposable foam plastic tableware immediately.

·In January 2002, the four-member bureaux of the State Economic and Trade Commission, the State Environmental Protection Administration, the State Administration for Industry and Commerce, and the General Administration of Quality Supervision, Inspection and Quarantine jointly issued the "Circular on Strengthening the Elimination of Law Enforcement Supervision of Disposable Plastic Foam Tableware".

3 Packaging Waste Treatment Methods

Plastic packaging waste belongs to the MSW category, and its disposal methods mainly include landfill, incineration, and recycling, as shown in Figure 1.

In the 1990s, the management of MSWs in various countries in the world had different treatment methods due to different national conditions. However, the major developed countries were limited to historical conditions and technical and economic levels in the past. They were mainly landfilled and incinerated, such as the United States. 72% buried, 13% incinerated, 17% recycled, 53%, 26%, and 21% in France, and 10%, 30%, and 20% in Japan, respectively. Most countries in Europe use incineration, such as end soil. 80%, Denmark 75%, Germany 50%. In the United Kingdom, 83% of cities use landfills. The combination of biodegradable plastics developed in recent years and composting is promoting the progress of MSW processing technology and has attracted world attention.

Since the end of the last century, with the increasingly tense resources and energy sources and the increasing environmental pollution, how to effectively and rationally utilize resources and conserve energy, and strengthening the handling and recycling of MSW has become a global concern. All countries have taken strengthening their efforts from the source, reducing the amount of waste generated and the reuse of resources as an important strategy. In order to protect the ecological environment, strengthen the use of resources, and treat wastes, the European Union has taken the lead in formulating the order of waste and the highest guiding tactics as the guiding principles for the implementation of relevant laws in EU countries. This principle also serves as a good guide for MSW processing in countries around the world.

3.1 Priority of Waste Disposal 1 Reduce

2 Reuse

3 Recycling (Recyele, Including Materials, Chemicals, Fertilizer Recycling)

4 Incineration heat recovery

5 Landfill treatment

3.2 Principles of Waste Disposal • Guiding Principles for the Recycling of Packaging Materials – From 1994 onwards, the recycling rate of various types of packaging materials waste must reach 25 to 40% within 8 years, and the ratio of incineration and recovery heat energy must reach 50~65. %.

Disposal Waste Disposal Indications: In recent years, the European Union is strengthening the recycling of resources and gradually reducing the proportion of landfill disposal. Based on the amount of waste landfilled in 1995, it will be reduced to 75% by 2006 and will be Declined to 50%, 2016 will drop to 35% level. In addition, the EU has banned the treatment of organic waste by landfills in order to prevent the emission of harmful gases such as CO2 and methane (CH4) from the landfill that can lead to greenhouse effect, as well as prevent groundwater from being contaminated due to leaching.

· Guidelines for composting - The advantages of composting are to reduce the greenhouse effect caused by gases such as emitted CO2 and CH4, increase the content of organic matter in the soil, improve soil physical and chemical properties, promote green manure agriculture, and act as a collector of "carbon" To achieve the purpose of resource reuse, the EU actively guides the composting method and requires that the heavy metals in compost materials must meet relevant standards in order to control the quality of compost and prevent the soil from being contaminated by heavy metals.

3.3 Environmental Protection "Green Point" Sign

The environmental protection packaging certification system is ISO14000. This environmental management certification is called the “green passport” recognized by the international market. At present, most countries in the world use this as the standard to promote the environmental protection packaging model. The ISO14000 series expressly states that all internationally purchased products (packages) must undergo environmental certification and ecological assessment (LCA) and use environmental labels.

Europe is implementing and improving green certification policies and regulations. Currently, eight countries have begun to implement the green certification system. Products without environmental management certification will be subject to quantity and price restrictions when they are imported.

In 1975, the world's first green packaging "green dot" logo was introduced in Germany. It is a circular pattern composed of green arrows and white arrows. The upper text is composed of German DER GRUNE PUNKT, which means "green dots." The green dot's two-color arrow indicates that the product or package is green and can be recycled and used, meeting the requirements of ecological balance and environmental protection. In 1977, the German government launched the “Blue Sky” green environmental protection label and granted products and packaging with green features.

After the use of the "Environmental Mark" in Germany, Canada, Japan, the United States, Australia, Finland, France, Switzerland, Sweden, Norway, Italy, the United Kingdom and other countries have also started to implement environmental labels for product packaging. Such as Canada's "Maple Pigeon", Japan's "Love the Earth", the United States' "Natural Friendly" and Certificate System, China's "Environmental Protection Mark", the European Community's "European Flower", Denmark, Finland, Sweden, Norway, etc. White Swans of the Nordic countries, the "NF" logo of France, the "Eco-label" of Austria, the "Eco-logo" of India, the "Eco-label" of South Korea, the "Green Mark" of Singapore, and the "Environmental Choice of New Zealand" "The "Eco-Products" of Portugal and "Environmental Friendly" of Croatia are all representatives.

Countries around the world have also formulated green product labels, but the names of ecolabels vary from country to country. For example, the “EPA mark” in the United States, the “EV system” in Canada, the “ecosystem standard” in Japan, and the “NF environment” in France. Wait. At present, the most successful eco-labels in the world are Germany's BLUE ANGEL and Japan's ECO MARK.