Letterpress Flexo Paper Bag or Cup Roll Printing Machine(DC-YT)
Â
 Application                                            Â
 Flexo printing machine is used resin plate for printing texts and images on paper roll,plastic film roll,non woven roll,thermal paper roll etc. Both of water based ink and solvent ink are ok to use.
Â
Main Features
1.Easy operation, flexible starting, accurate color register.
2.The meter counter can set printing quantity according to the requirements. Stop the machine automatically at the quantity or when the material is cut off.
3. Pnuematic operation printing cylinder lift and lower, is will stir the printing ink automatically after lifting.
4. The printing ink is spread by the anilox cylinder with even ink color.
5. Reliable drying system coordinated with high-speed rotation, it will automatically break circuit when the machine stops.
6. 360°continuous and adjustable longitudinal register device.
7. The frequency control of motor speed adapts to different printing speeds.
8. There are Jogging/Stopping buttons on the plate roller base and material rolling rack so as to make it easy operate the machine when the plate is installed.
9. Automatic Edge Position Control system, can correct deviation of material, ensure material in right place.
10. Automatic Magnetic Powder Tension control system, can let film in a condition of a settled suitable tension, insure the high quality of finished roll.
11.use air shaft
Â
 Picture                                       Â
Â
Â
Â
 Main Technical                                       Â
Type |
YT-4600 |
YT-4800 |
YT-41000 |
Max. Web Width |
600mm |
800mm |
1000mm |
Max. Effective Printing Width |
560mm |
760mm |
960mm |
Range of Repeat Printing Length |
191~914mm |
191~914mm |
191~914mm |
Max. Diameter of Roll Material |
450mm |
450mm |
450mm |
Printing Speed |
5~50m/min |
5~50m/min |
5~50m/min |
Plate Thickness(Both side adhesive tape included) |
2.38mm |
2.38mm |
2.38mm |
Total Power |
12Kw |
14Kw |
16Kw |
Overall Dimension |
4300×1860×2145mm |
4300×2060×2145mm |
4300×2760×2145mm |
Â
 Â
 Contact Us                                     
Letterpress Flexo Paper Bag or Cup Roll Printing Machine(DC-YT)
Â
 Application                                            Â
 Flexo printing machine is used resin plate for printing texts and images on paper roll,plastic film roll,non woven roll,thermal paper roll etc. Both of water based ink and solvent ink are ok to use.
Â
Main Features
1.Easy operation, flexible starting, accurate color register.
2.The meter counter can set printing quantity according to the requirements. Stop the machine automatically at the quantity or when the material is cut off.
3. Pnuematic operation printing cylinder lift and lower, is will stir the printing ink automatically after lifting.
4. The printing ink is spread by the anilox cylinder with even ink color.
5. Reliable drying system coordinated with high-speed rotation, it will automatically break circuit when the machine stops.
6. 360°continuous and adjustable longitudinal register device.
7. The frequency control of motor speed adapts to different printing speeds.
8. There are Jogging/Stopping buttons on the plate roller base and material rolling rack so as to make it easy operate the machine when the plate is installed.
9. Automatic Edge Position Control system, can correct deviation of material, ensure material in right place.
10. Automatic Magnetic Powder Tension control system, can let film in a condition of a settled suitable tension, insure the high quality of finished roll.
11.use air shaft
Â
 Picture                                       Â
Â
Â
Â
 Main Technical                                       Â
Type |
YT-4600 |
YT-4800 |
YT-41000 |
Max. Web Width |
600mm |
800mm |
1000mm |
Max. Effective Printing Width |
560mm |
760mm |
960mm |
Range of Repeat Printing Length |
191~914mm |
191~914mm |
191~914mm |
Max. Diameter of Roll Material |
450mm |
450mm |
450mm |
Printing Speed |
5~50m/min |
5~50m/min |
5~50m/min |
Plate Thickness(Both side adhesive tape included) |
2.38mm |
2.38mm |
2.38mm |
Total Power |
12Kw |
14Kw |
16Kw |
Overall Dimension |
4300×1860×2145mm |
4300×2060×2145mm |
4300×2760×2145mm |
Â
 Â
 Contact Us                                    Â
Catalog of stainless steel Lounge Chair from Shenzhen Yadea factory. We manufacture high quality stainless steel lounge chair with leather or fabric upholstery. The stainless steel lounge chairs are available in polished finish or brushed finish. Both finish of the stainless steel lounge chair look beautiful and luxury. The stainless steel lounge chair is also with modern elements and environment-friendly.
And we have many different kinds of stainless steel lounge chair to make you as a reference. Such as classic Planter lounge chair, it has been one of the most popular chair for century. If you want some special, we also can meet your demends.
Metal furniture uses metal pipes, plates or rods as the main structure, furniture made of wood, various types of artificial boards, glass, stone, etc., and iron furniture made entirely of metal materials, collectively referred to as metal furniture.
People often say that "steel-wood furniture" should be understood as metal furniture from a professional concept. Steel-wood furniture is only one type of metal furniture. Metal furniture can well create different atmospheres required by different rooms in the family, and can also make the home style more diversified and more modern.
Advantages and characteristics of metal furniture: very individual style, rich color selection, diverse categories, folding function, aesthetic value, good quality and low price.
Stainless Steel Lounge Chair,Lounge Stainless Steel Modern Chair,Stainless Steel Portable Lounge Chair,Stainless Steel Beach Lounge Chair
DELO SOFA , https://www.modernluxuryfurnitures.com